Viper Pro-25™ Raptor Cobalt Traction Magnets for Viper V1 & BSRT G3-R Cars

Description

Viper Pro-25™ Raptor Cobalt Traction Magnets for Viper V1, BSRT G3-R, and Tomy Super G Plus
Level 25 Cobalt machined magnets replace the standard Tomy SG+ traction magnets and fit Viper V1™ and BSRT G3-R applications.
These are extremely powerful cobalt traction magnets made to drop into Viper V1 & BSRT G-3R stiff chassis.  Magnets come with top shims.
You need to be very careful in handling them - Do Not Let Them Snap Together.
Y
our track needs to have a good power
supply and controller.
These are 'full-width'
magnets so you will need to run narrow rears to meet any club width restrictions.
You can NOT run your car dragging the rails - you'll cook your motor.
You will need a good traction magnet clip in a Super G Plus to hold these monsters in.
Magnets have the 'G Notch' to fit Viper V1™ and BSRT Scale Auto G3-R chassis.  Top shims are included !
These magnets are too strong for a Viper V1 & BSRT 'flexible' chassis and clips.  You will need to run them in a medium or stiff chassis.
You get one (1) pairs of magnets and the top shims.
Not responsible for cooked motors if you run your car too low and/or with too soft a tire.
It is recommend that you run firm slip-on tires such as Super Tires in compound "B" on a quality aftermarket hub.  Level 10 motor magnets and Level 25 traction magnets can be used with the 2.5 Ohm NSX armature for road racing.  Use a stiff chassis for road racing.
Running cars for example only - not included.
NOTE: not responsible if you let these magnets get away from you and snap together, fly across your bench into something else, have magnets fly in and snap on to these and crack and chip them. It can be a real problem if you are not careful with your builds. Damaged magnets will not be replaced - period.
CHECK OUT MY OTHER AUCTIONS!!
PLEASE ADD ME TO YOUR FAVORITE SELLERS LIST. Thanks for looking.
Good luck bidding from HCSlots  !!